Tolerances (continued) ______________________________________________________________________________

FACE RUNOUT WITH BORE The total indicator reading during one complete revolution of the inner ring.   O.D. RUNOUT WITH FACE The total indicator reading during one complete revolution of the outer ring. The outer ring is positioned against 2 stops oriented at 90° to each other. ABEC/ISO TOLERANCE CHART Dimensions in Inches (mm) INNER RING TOLERANCES Inches (mm) TYPE OD SIZE ABEC 1 ISO Normal ABEC 3 ISO P6 ABEC 5 ISO P5 ABEC 7 ISO P4 MEAN BORE TOLERANCE ALL 0 to .709 0 to 18 0 to -.0003 0 to -.008 0 to -.0002 0 to -.005 0 to -.0002 0 to -.005 0 to -.0002 0 to -.005 2 PT OUT OF ROUNDNESS* ALL 0 to .709 0 to 18 NS NS .0001 .003 .0001 .003 BORE TAPER* ALL 0 to .709 0 to 18 NS NS .0001 .003 .0001 .003 RADIAL RUNOUT* ALL 0 to .709 0 to 18 .0003 .008 .0002 .005 .00015 .004 .0001 .003 FACE RUNOUT WITH BORE* ALL 0 to .709 0 to 18 NS NS .0003 .008 .0001 .003 FACE RUNOUT* ALL 0 to .709 0 to 18 NS NS .0003 .008 .0001 .003 WIDTH VARIATION* ALL 0 to .709 0 to 18 NS NS .0002 .005 .0001 .003 RING WIDTH TOLERANCE ALL 0 to 1.1811 0 to 30 0 to -.005 0 to -.125 0 to -.005 0 to -.125 0 to -.001 0 to -.025 0 to -.001 0 to -.025 * Maximum allowed value NS = Not Specified