Bearing Selector
Available Bearing
Request Catalog
Testing Service
Contact
Contract Mfg
Technical Information
Home
 
Available Bearings
Ball Bearings - Inch Precision
Ball Bearings - Metric Precision
Ball Bearings - 600 Series
Ball Bearings - 6000 Series
Ball Bearings - 6200 Series
Ball Bearings - 6300 Series
Ball Bearings - R Series
Ball Bearings - 1600 Series
Thrust Bearings
Thin Section Bearings
Bushings
 
About DynarollTechnical PapersNew ProductsSales Office


Ball Bearings - Selection Charts (Continued) ________________________________________________________

THRUST BALL BEARINGS

Thrust ball bearings consist of two precision chrome steel washers (ring) and a ball complement spaced by bronze retainer. They can be supplied with or without radius ball grooves in the rings. Thrust bearings are used under purely axial loads.
The table below shows available bearings of the type you have selected. Basic dimensions and load ratings are given. To complete the bearing selection process CLICK ON THE PART NUMBER of the bearing that best meets your application (left column). This will take you to the DETAILED SPECIFICATION page where you will make final selection of other important bearing parameters.
THRUST BALL BEARING
Dimensions in mm
Dynaroll Bearing No.
BORE
(d1)
BORE
(d2)
OD
(D1)
OD
(D2)
Fillet Radius
(r)
Height
(H)
3.0
3.2
7.8
8.0
0.20
3.5
4.0
4.2
8.8
9.0
0.20
4.0
4.0
4.2
9.8
10.0
0.20
4.0
5.0
5.2
9.8
10.0
0.20
4.0
5.0
5.2
11.8
12.0
0.20
4.0
6.0
6.2
11.8
12.0
0.30
4.5
6.0
6.2
13.8
14.0
0.25
5.0
7.0
7.2
14.8
15.0
0.30
5.5
7.0
7.2
16.8
17.0
0.30
6.0
8.0
8.2
16.0
16.0
0.30
5.0
8.0
8.2
18.8
19.0
0.40
7.0
9.0
9.2
16.8
17.0
0.40
5.0
9.0
9.2
19.8
20.0
0.40
7.0
10.0
10.2
18.0
18.0
0.30
5.5